Windows Key is an easy-to-use tool to gain access into any Windows system if a login password is lost. The software allows you to reset passwords in a matter of minutes - no need to reinstall the system.
Windows Key creates a password reset CD, USB Flash Drive or a driver floppy that work during the boot process and instantly reset Administrator or other account passwords and Windows security settings that prevent you from logging in.
General Features
100% recovery rate
Windows Vista supported
All passwords are reset instantly
Resets passwords with a bootable CD-ROM, USB drive or driver floppy
Burns password reset CD
Resets local policy settings
Resets secure boot options: startup password or startup key disk
Displays account properties
Supports all Service Packs
Supports RAID/SCSI/SATA drives
100% Money back guarantee
Windows Key HowTo
Below are the steps to reset Windows account password using Windows Key.
Using a Windows Key bootable CD
Click the "CD image" link
Insert Windows Setup CD and browse for the TXTSETUP.SIF file. The file is usually located in the 'I386' folder of the Windows Setup CD. Click "Next"
(Don't have any Windows Setup CD? Request a Windows Key .ISO download)
Enter you name and set your own password for the bootable CD (you may set an empty password). Click "Next"
WindowsKey.iso file is created
Insert a blank CD, specify your burning drive from the list and click "Next"
Windows Key password reset CD is ready
What should I do next?
Reboot your system with this CD
Windows Setup process starts
After all the required files are loaded from the bootable CD, Windows Key starts working. It displays your license info and asks to enter the password that you set for the bootable CD
Continue to step 14*
Using a Windows Key bootable USB Flash Drive
Click the "USB Flash Drive" link
Connect a blank USB Flash Drive. Click "Next"
Insert Windows Setup CD and browse for the TXTSETUP.SIF file. Click "Next"
(Don't have any Windows Setup CD? Request a Windows Key .ISO download)
Enter you name and set your own password for the bootable USB Flash Drive (you may set an empty password). Click "Next"
Windows Key password reset USB Drive is ready
What should I do next?
Reboot your system with this USB Drive.
To reboot your PC with USB Flash Drive you may need to set the following options for the BIOS Setup Utility: after rebooting your PC please press "Del" or "F2" to run BIOS Setup Utility, go to the "Boot" section and press "F6" to move the "Hard Drive" device up, press "Enter" on the "Hard Drive" option and press "F6" to move the "USB Drive" device up. After all the changes are set please press "F10" to exit and save the settings
Windows Setup process starts
After all the required files are loaded from the USB Drive, Windows Key starts working. It displays your license info and asks to enter the password that you set for the bootable USB Flash Drive
Continue to step 14*
Using a Windows Key driver floppy
Click the "driver floppy" link
Insert a blank floppy into the floppy drive and click "Next"
Enter you name and set your own password for the driver floppy (you may set an empty password). Click "Next"
Windows Key creates three files on the floppy: winkey.sys, winkey.inf and textsetup.oem. The driver floppy is ready
What should I do next?
Insert Windows Setup CD or bootable floppy and reboot your PC
Windows Setup blue screen appears
Press "F6" when Windows Setup prompts for additional drivers at the bottom line of the blue screen
Windows Setup continues loading required files from the bootable CD or floppies
Windows Setup prompts you to press "S" to specify additional drivers. Press "S" and insert the Windows Key driver floppy
Press "Enter" to specify the "Windows Key" driver
Windows Setup loads the files from the floppy drive
Windows Setup continues loading the files from the Setup CD or prompts you to continue with the rest of the bootable floppies
After all the required files are loaded from the Setup CD or bootable floppies, Windows Key starts working. It displays your license info and asks to enter the password that you set for the driver floppy
Continue to step 14*
Boot Mode
14*. Please enter the password that you have set for the Windows Key bootable media
15. Select the Windows installation to be unlocked
16. Windows Key asks: "Undo Windows Key changes? (Y/N)". Press "N" if you want to reset the password or "Y" if you want to leave the original passwords and cancel the program changes
17. Select the account to reset the password for
18. Windows Key asks: "Reset 'account_name' password? (Y/N)". Press "Y" to reset the password or "N" to leave the original password
19. Windows Key asks: "Reset password for another account? (Y/N)". Press "Y" to reset password for another account or "N" to quit Windows Key
20. Remove the Windows Key bootable media and restart your PC.
(Size: 5.4MB)
No comments:
Post a Comment